Disinfectant and cleaning solution for instruments + cutters, 2000 ml

Regular Price
24,95 €
Sale Price
24,95 €
Regular Price
Sold Out
Unit Price
per)

Tax included. Shipping calculated at checkout.
Only 2 left!

Disinfectant and cleaning solution for instruments and rotating instruments (milling cutters, 2000ml)

Consistency: liquid

Area of ​​application: instruments

Alcoholic: No

Texture: Solution

Medical device: Yes, Class IIb

Capacity: 2,000ml

- now with a fresh lemon scent and fresh yellow color

- ready to use, alcohol-free

- good material compatibility

- suitable for ultrasonic baths

- with corrosion protection

- VAH listed

Areas of application Ready-to-use combination preparation to disinfect and clean instruments and rotating devices. Can be used in an ultrasonic bath.

Spectrum of action and exposure times: Ready-to-use solution! Do not dilute! Recommended use for instrument disinfection: bactericidal, yeasticidal according to VAH guidelines: 5 minutes, limited virucidal: 5 minutes.

Application

Disinfectant cleaning using the immersion bath process: Place instruments, if necessary after rough cleaning, in the working solution while they are open and, if necessary, clean them mechanically. All surfaces and cavities must be completely wetted with the working solution. After the exposure time has elapsed, rinse the instruments thoroughly with deionized water and reprocess them further.

Disinfectant cleaning in the ultrasonic bath: The disinfectant and cleaning solution can be used to increase the cleaning performance in commercially available stainless steel ultrasonic baths. The solution used must be degassed before first use. Do not exceed the exposure time according to the manufacturer's instructions and temperatures of 40 °C. After the exposure time has elapsed, rinse the medical devices thoroughly with deionized water and process them further.

Instructions for use: The working solution used must be changed immediately if it becomes visibly dirty, but at the latest after one working day. For final disinfection, prepare medical devices from risk class semicritical A with a virucidal disinfectant. Instrument trays must be cleaned and disinfected at least every working day, preferably with a disposable wipe soaked in alcohol.

Use disinfectant carefully. Always read label and product information before use.

Composition: 100 g of solution contains: 0.28 g of N, N-didecyl-N-methyl-poly-(oxyethyl)-ammonium propionate, 0.19 g of alkylpropylenediamine-1,5-bisguanidinium diacetate.

Material compatibility: Application is not recommended for the following materials: brass, aluminum, polystyrene (PS), polysulfone (PSU), polyethylene terephthalate (PET), polymethyl methacrylate (PMMA), acrylonitrile butadiene styrene (ABS), polycarbonate (PC), polyurethane (PUR), silicone. Material compatibility is only limited for steel drills in the material group ISO 310 (hard steel), as this depends on the alloy used by the manufacturer.

Use disinfectant carefully. Always read label and product information before use.